Description
DJI Enterprise RC Battery LiPo 4280 mAh 22.8 V TB50 Inspire 2 TB50 Battery for DJI Inspire 2 Multicopter Capacity: 4280 mAh Voltage: 22.8 V Design: Hardcase Compatible models: Inspire 2 Weight: 515 g Maximum 25 minutes flight time with the Zenmuse X5S and 27 minutes flight time with the Zenmuse X4S possible LiPo battery – the ideal energy source for brushless drives LiPo stands for lithium polymer and is a further development of the lithium-ion battery. This type of battery has a much higher energy density compared to NiMh batteries. For this reason, LiPo’s are ideally suited for use in combination with powerful brushless electric motors. This is a LiPo battery, which may only be charged with a LiPo-compatible (balancer) charger and under no circumstances with a pure NiMH charger. If the speed controller used does not have a LiPo shutdown, you can monitor the deep discharge (below 3.3 V/cell) with a LiPo tester.
Compatibility: DJI Enterprise
Note: Dimensions width 0 mm Height 0 mm Length 0 mm Weight 515 g Type of construction Hardcase compatibility Application area Multicopter Interfaces Plug type Special General Balancer connection None (BMS integrated) Energy Voltage 22.8 V Capacity 4280 mAh Battery Number of cells 6S Li-XX Battery type Lithium-Polymer (LiPo) Capacity Watt-hours 97.98 Wh Shipping data Weight 600 g Volume 0.00108388 m3 Dimensions 6.5 x 14.5 x 11.5 cm
Status: DRAFT, 0
This page is also available in: Deutsch Français Italiano Español
Additional information
| Weight | 0.0010 kg |
|---|
